• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Glass Window Repair

Professional window repairmen work up above the ground, moving massive glass panes. They adhere to strict safety standards and frequently work in harsh weather conditions.

Wearing protective clothing, take off the metal glazing points as well as the glazing putty by using a utility knife. A heat gun can help to soften the old putty and accelerate the removal process.

Replacement

It can be tempting to fix the glass of your window instead of replacing it if a pane breaks. It is more cost-effective to replace a window, and it can also help avoid other issues that could affect the efficiency of your home. Consider the kind of glass damaged to determine if it's a temporary fix, or if a long-term solution is needed.

To fix a broken window repairs near me, remove the frame or sash and place it on the work surface. While wearing eye protection, gently move the frame and remove any shards remaining in the window. Then, use a utility knife to cut off the glazing compound and points that help to hold the glass in place. Keep track of the components and their locations to make sure they can be reinstalled later.

After you've removed the frame and sash you can start preparing to replace the glass. Before you begin, make sure that the opening in the frame is properly designed for the replacement window. Take measurements both ways across the opening, then subtract 1/8 inch from each measurement to give space for expansion and contraction of the frame and glass. Then, purchase double-strength glass that are cut to these exact dimensions. It is also recommended to purchase enough new glazier's points or clips to be placed every 6 inches around the window pane.

Based on the window's warranty the window may be covered by the manufacturer and in this case, you need to contact them to file a claim. After the new glass has been erected, it is important to cover it with a thin layer of glaziers compound. After the compound has dried, you can paint it to match the rest of the window frame.

If your crack is more than an inch in length, you can prevent it from spreading by scoring the crack with a small arc, just above the crack. This method isn't foolproof, but it can slow the progression of the cracked until you are able to take permanent measures.

Repair

Professional window installers are equipped with the right tools and know how to handle various types of glass. They know how to dispose of waste safely and are therefore less likely than other contractors to leave behind a mess that could harm family members or pets. They are also familiar with working with different types of windows and could be able to spot issues that an inexperienced home owner might not see.

Wear safety glasses and gloves prior to starting the process of repairing damaged glass. A small crack can cause shards to fly, creating a risk for anyone in or around the home. It's important to determine the cause of the crack, since this can prevent future problems.

Make a two-part mix of epoxy. These are usually a 50/50 mix of hardener and resin and they must be quickly mixed. Once the mixture has been prepared, apply it directly to the crack and allow it to dry. It should take only a couple of minutes, but it is important to work quickly because the mixture is extremely thick and will dry very quickly.

After the epoxy has dried, you can get rid of any excess using a putty knife. After that, you'll need clean the area around the cracked glass. If you don't clean it correctly, the residue could cause further damage to the glass. Use a putty blade smooth out the compound around the edge of the window and match it to the frame made of wood.

You could consider using a plastic cover for a more durable option. A trash bag that is heavy-duty or tarp is ideal, however you can also apply masking tape to the glass. This will prevent the crack from expanding, and will also keep out wind, water, bugs, and debris.

If you're unable to get to the window fast enough then you can apply silicone sealant to make temporary repairs. Simply place a tiny amount of the material around the outside of the broken window. It won't completely seal the gap between frame and glass but it will help keep the break in place while you repair it.

Repainting

Repainting old glass windows is a good idea. This is a cost-effective alternative to window replacement and can give your home a fresh new appearance. Make sure the window is clean before painting. Use rubbing alcohol or soap and water to wash away oil smudges, as well as other traces of dirt that can hinder paint from adhering. Wear rubber gloves while working on glass to avoid the risk of transferring your own oils onto the window's surface. Apply several thin coats rather than one thick coat. This will allow the paint to last longer and make your windows appear smooth and even.

If you're planning on repainting your glass windows, ensure that you have all the right tools at hand. You'll need either a brush or sponge as well as a painter's tamper as well as a ruler and toothpicks. You'll need the paints and brushes that you will be using in your kit. Follow the manufacturer's directions. Have patience because it could take some time for the paint to completely dry.

Also, ensure that the area you're working in is well ventilated if you're using solvent-based paint. This will decrease the chance of inhaling toxic chemicals, and the paint will dry quicker. It is also important to ensure you have a protective mask for any spray paints that you use.

For older glass windows, you'll need to prepare the surface prior to painting. Use soap and warm water to thoroughly clean the glass window. Then, rub alcohol on any grease or oil residues that might hinder the adhesion of the paint. Be sure that the windows are completely dry before you begin to paint them.

If you have energy-efficient double pane windows on your windows, it could be possible to make an insurance claim for repair or replacement with the company that makes the windows or dealer who sold them. This is especially true if your windows are still under warranty and you've had multiple problems with condensation or damaged glass.

Sealing

Whether you have old double-pane windows that have a cracked seal or newer insulated glass units (IGUs) that have experienced defogging or fog, there are many options to address the issue. The most expensive option is to replace the insulated unit and frame however it could be necessary if condensation or fog are causing energy loss. Other options include replacing the IGU with a single-pane, or repair it by drilling a small hole in the bottom of the unit and filling the solution with anti-fog.

You can also close the gap between the window frame and the threshold or sill with a felt strip, vinyl v-strips, or door sweep. Felt can be stapled, glued, or put in place, but it doesn't offer much protection against moisture. Vinyl v-strips are easy to install and long-lasting however, it can be costly. It is typically reserved for areas that are subject to high abrasion. Door sweeps are able to be easily nailed in place and are cheap. However, they provide little or no protection between the threshold and the air.

To fix a cracked window seal, first employ a putty knife to remove the old caulk. Wearing gloves and eye protection remove the glazing point -- tiny fasteners with sharp, pointed tips that pin the glass into the recess of the frame. After you have removed the glazing points, clean the grooves and sand the wood until it is smooth. Wipe away any sanding sludge, then seal the bare wood surface using a linseed oil-based paint or clear sealer.

A caulking knife or putty can be used to apply the traditional glazing putty. However, using a knife will give an easier application and a stronger seal. Make sure you choose a putty specifically designed for glass windows as it will be more adhesive and durability.

Apply a thin bead of the putty on the inside edge of the frame, where it meets the glass. Slide the window into the frame, so that the scribed line on the glass aligns with the edge of the frame. Apply pressure to the glass to force the putty and glass into a tight seal. Smooth the compound with a gloved hand and remove any drips or caulk that were applied incorrectly before it has dried.