• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Check the windows sashes regularly for damage, mildew, and mold. You can avoid future repair costs by catching problems early on, before they get out of hand.

The sash is the internal framing that can be moved vertically up or down in windows that open. This article will teach you how to do simple repairs to sash.

Weather Stripping

Wooden window sashes are a great way to add an elegant appearance to your home. They are also durable and will last for many years if they are properly maintained. However, they can become damaged or degrade in time because of exposure to the elements and normal wear and tear. Sash repair experts can restore windows back to their original condition and maintain their appearance much longer than replacement windows.

The first step in repair sash windows is to address weather stripping. It's found on both the sash and 257634 - www.257634.Xyz - frame. If it's worn or loose, out, it could cause drafts and other problems. Begin by identifying the window's brand and the glass manufacturer's date (etched on the glass's corners or on the aluminum spacers between panes). Then, remove the sash and mark its height and width, so you can find the appropriate weather stripping replacement to match.

Then, you can remove the sash from the holder and place it on an even surface that allows you to reach all four sides. If the sash is double-hung, you'll need to remove the weights and their accompanying ropes that should have fallen into the pocket of the jamb liner. Once you've removed the sash and the weights, use a utility knife to cut away the weather stripping from the corners. Then, remove it manually or using a putty knife.

When the sash is clean it is time to replace the parting stops. These are long pieces of wood that divide the two sashes. Pam prefers to replace them with standard 1/2-inch by 3/4-inch window trim from the lumberyard, however you can also use scrap wood.

After removing the stopper and cutting it to length and then apply a thin layer of glazing compound to the bottom of the sash. Smooth the compound using your putty tool, and let it dry for at least a day. Once it's fully cured, apply a top coat of acrylic latex paint. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports the window sashes can wear out with time and use. This can result in windows or doors that is difficult to open or close. The good thing is that fixing and replacing this hardware is generally relatively easy and affordable. If you're having trouble opening a sash spray some lubricant into the jamb channel. Then slide the sash open to see if it resolves the problem. If the problem persists it's likely the sash balance. It is necessary to take off the window sash to get access to this part of the hardware.

Ideally, window sashes must move open and shut without effort, but this is an issue when the weights wear out or if the sash meeting rail isn't properly glazed. This problem can be due to many factors, including an absence of maintenance or a mismatched weight rating.

If the hinge arms on windows begin to slide, this could cause the sash to drag and eventually hit against the frame at the opposite corner (Photo 1). To resolve this problem, first ensure that the sash fits squarely in the opening of the frame and then remove it from the window. If the sash is screwed onto the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Due to sagging hinges, and a general lack in energy efficiency, old windows, especially those in older houses, could be difficult to open and close. In most cases, a few simple repairs can turn these windows into smooth operation and save homeowners cash on energy costs.

It is crucial to have the tools you need before you start. Mark the hinge channel's location on the frame (Photo 1) using pencil. This will allow you to position the channel in the correct place when you are finished. Then, remove the sash and take off the hardware including the beads that separate (Photo 2) and the chains or cords which hold it in place. Heat gun with nozzle shield and a medium setting can soften any putty that has been hardened. Take off the old sash and 257634 store it in a labeled bag.

Sash Weights

No matter if your window sash repair needs are to replace a damaged cord or to keep the windows functional by replacing worn out sash weights will improve sash operation and help reduce energy costs. Sash weights consist of heavy iron or lead cylinders that are encased in a concealed cavity and attached by ropes to the movable window sash. These weights act as counterbalances and allow you to open and shut the window without the need for mechanical or electrical devices. If they fail, sashweights are usually neglected or not used by homeowners.

A sash weight that has fallen out of the cavity is difficult to get back It is therefore important to find a new one that fits properly. You will also need an additional piece of string, a length of sash cord and some sash pulleys that will tie the new sash weights to the sash cord.

Mortise and Tenon joints are used to join older wood windows. Pin punch and hammer can be used to take out the wood pegs that hold the components together. Most of these pegs have large diameters on one side and a smaller size on the other, so it is essential to remove the smaller-diameter sides first. Sashes that were made later in the century used glue instead of pegs and can be separated by cutting the glue line with a knife, then tapping the mortised section loose with mallets.

After the sash is removed, you can take off the sash stops and gain access to the weight pockets. This is typically done by drilling an opening at the bottom of each jamb. The hole is then covered with a wooden panel that can be removed to reveal the interior workings.

Once the sash is stopped and the access panel is removed, you can take off the weight that was previously installed and replace it. Weigh the sash first, as the weights you've got may not be the right size. After the new weight is in place you can tie a string around it and thread it through the pulley for the sash. Then, attach the string to the boxed frame. Leave a few inches at the top of the string to allow future adjustments.

Sash Cords

Most old double-hung windows come with a chain or cord connected to the weights that keeps the sashes level in the jamb. As time passes, these cords can get damaged and make it difficult to raise windows. A new sash cord will give you the ability to move the sash upwards and downwards and hold it in place when opened.

The first step to replace cords for sash is to locate and take out the access panels located in the jambs. They are typically fixed or screwed in and will need to be removed or repositioned. It is possible to remove them with the hammer or chisel but it is always better to lay out dust sheets before beginning any work.

After you have removed the access panel, you can begin working on the sash. Make the small parting beads (also known as "tie rails") out of their grooves with the chisel or flat bar. These are often wedged in or nailed, but they can be removed and it's worth your time here. If the sash is still in place, break the mortise and tenon joints using a hammer and pin punch or screwdriver, then unhook the wood pegs on the components. The sash should be able to move freely, however it may need some lubrication in order to feel less stiff.

Measure the length of sash chain/sash cord required to reach the sash slot at the bottom, and the pulley on the top of the jamb. Cut the cord/chain and secure it in Step 6 above. You can use a hammer and screws or nails, but nails are less likely to cause damage.

It is recommended to keep the original weights if you have purchased a kit to replace the counterbalance that was previously installed. They're not expensive and simple to install if you purchase them from salvage shops for architectural use. Based on the size of your window one or two sash weights might be required to keep it open.